Facebook Twitter Instagram
    FeedTheHabit.com
    • Home
    • Gear Reviews
      • Mountain Biking
      • Road Biking
      • Bike Commuting
      • Trail Running
      • Skiing
      • Outdoors
      • Water Sports
      • Vehicles
    • News
    • Trip Reports
    • Videos
    FeedTheHabit.com
    Gear Reviews

    Review: Bontrager Pro Blendr 7 Degree Stem

    Jason MitchellBy Jason MitchellOctober 31, 2016No Comments5 Mins Read

    Stems can do more for your bike than you think. As an essential part of you bike’s cockpit, the stem serves as a primary part of your overall bike fit and can often do even more than that. The new Bontrager Pro Blendr stem is a great example of a stem that can do more.

    Bontrager Pro Blendr 7 Degree Stem Features:

    • Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems
    • 4-bolt dual band clamp securely holds handlebar
    • Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec
    • Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts
    • Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories
    • Approved for carbon bars and steerer tubes
    • Safe installation requires 5mm spacer above and below stem
    • Weight: 143g (110mm)
    • MSRP: $114.99
    The Pro Blendr looks good with or without Blendr mounts.
    The Pro Blendr looks good with or without Blendr mounts.

    Will it Blendr? Yes it will.

    The famous Blendtec blender videos show the company’s founder blending all kinds of things. While that kind of test might be fun, you’d never know just what makes Bontrager’s new Pro Blendr stem unique. For starters, it’s a light and stiff stem available in a nice 7-degree or 17-degree rise/drop. Unless you’re a pro, the 7-degree is the ticket and what I’ve been riding aboard the new Trek Domane SLR Disc.

    I’ve said this before and I’ll say it again — stem length is a critical factor in proper bike fit, but remember that it works in concert with the reach and drop of your handlebars. I vary between 110 and 120mm stem lengths based on the frame measurements and bar reach. Know your measurements and if you don’t, it’s probably time to head to a bike fitter.

    Pictured with the Blendr single mount and Ion 100 R.
    Pictured with the Blendr single mount and Ion 100 R.

    Aside from the proper length, stems can provide stiffness and some of them can even provide chatter reduction (like the Zipp Speed SL). With the Pro Blendr Stem, you’re not getting chatter reduction, but you are getting a lightweight and stiff stem at a price on par with other high-quality alloy stems. The icing on the cake is the Blendr integration that enables hard mounting points for lights, computers, cameras and more. If you find yourself with limited bar space or have an aero bar, this stem will do the trick nicely.

    With Blendr, your accessories will be out front and centered on your bike. This is great for lights, like the Bontrager Ion 100 R but will also work with Trip, Garmin, GoPro and SRM accessories. There are two options — single or double Blendr. Going double is awesome because you can mount your Garmin with a light underneath, but if your bars have cable grooves on the frontside of the tops (like the Bontrager IsoCore VR-CF), the double mount might not work so well. I tried it but my cables were bent awkwardly, so I just stuck with the single mount and used it primarily for the Bontrager Ion 100 R light.

    The Pro Stem Duo base did cause issues with cable routing.
    The Pro Stem Duo base did cause issues with cable routing.

    I found myself wishing that the Blendr base could be installed without disassembling the stem, but, as I learned, that’s necessary to ensure a solid mounting point. There are stepped grooves that keep the mount in place on both the top and bottom of the stem clamp. It’s easy to get the top in place and not the bottom, so make sure and pinch the mount in place and hold it there until the bar is snug, then make fine-tune adjustments. Interchangeable mounts can then be swapped as needed. I put them in place just snug enough to stay steady, but loose enough to make small adjustments.

    Something else worth mentioning is that center marks may no longer be visible with the base installed and you get separate front faceplate clamps instead of a unified design. Because of that, installation can be a bit of a cluster, but have patience and it all works out just fine. Don’t forget carbon paste and a trusty torque wrench (I use the Park Adjustable Torque Wrench).

    All-in-all, the Blendr Pro base is nice to have and adds to the flexibility of the Pro Blendr Stem, but the stem itself is also quite nice. It has a nice, clean look and can be set up as plus 7 or minus 7 degrees, as needed.  Alternatively, there is a 17-degree model should you like to get extra low. Lateral stiffness is solid and this stem works as advertised. The 143g. weight is respectable and within range of the competition.

    The Good

    • Blendr integration is great for lights, computers, etc.
    • Great stiffness and respectable overall weight
    • 7-degree rise/drop is good for most of us
    • Mono or Duo Blendr mounts available
    • Excellent clamping reliability
    • Frees up real estate on bars

    The Bad

    • Duo Blendr base may interfere with cables
    • Blendr base can be tricky to install

    The Bottom Line: Bontrager Blendr Pro Stem

    When looking at a lightweight stem for your ride, Bontrager has taken things up a notch with Blendr integration. I’ve loved it for mounting lights, but did have trouble getting the Duo base mount to work with my existing cable routing. A little planning ahead will likely ensure the double mount will work for you.

    Buy Now: Visit Bontrager.com or Your Local Trek Dealer

     

    ShareTweet
    Bontrager
    Previous ArticleReview: Westcomb Stratum Zip with Polartec Power Wool
    Next Article Brooks Mazama Trail Running Shoe Review
    Jason Mitchell
    • Website
    • Twitter

    A native of the Pacific Northwest, Jason quickly developed a love for the outdoors and a thing for mountains. That infatuation continues as he founded this site in 1999 -- sharing his love of road biking, mountain biking, trail running and skiing. That passion is channeled into every article or gear review he writes. Utah's Wasatch Mountains are his playground.

    You Might Also Like

    Küat Grip 4 Ski Rack Review

    January 26, 2023

    Trek Circuit Thermal Long Sleeve Jersey Review

    January 23, 2023

    Mountain Hardwear Stretch Ozonic Insulated Jacket Review

    January 19, 2023

    Leave A Reply Cancel Reply

    Most Popular

    Montec Fawk Ski Jacket and Bib Review

    February 28, 2022
    8.9

    Zipp 303 S Carbon Wheelset Review

    November 4, 2021

    Patagonia Downdrift Parka Review

    February 2, 2022
    8.5

    Canyon Lux Trail CF 7 Review

    November 28, 2022
    9.2

    SRAM Rival XPLR eTap AXS Groupset Review

    August 12, 2022

    Ultimate All-rounder? Patagonia Nano Puff Jacket Review

    February 2, 2021

    SRAM Rival/GX AXS Mullet Gravel Kit Review

    September 17, 2021

    Patagonia Storm Shift Jacket and Pants Review, feat. Gore-Tex ePE membrane

    December 21, 2022
    9.1

    Bontrager Aeolus Pro 51 TLR Wheelset Review

    September 9, 2021
    9.1

    Bontrager Aeolus Pro 37 TLR Wheelset Review

    June 18, 2020
    Follow Us
    • Facebook
    • Twitter
    • Instagram
    Advertisement
    Our Latest Posts
    • Küat Grip 4 Ski Rack Review
    • Ibis Exie Goes Global
    • Trek Circuit Thermal Long Sleeve Jersey Review
    • Mountain Hardwear Stretch Ozonic Insulated Jacket Review
    • Pearl Izumi PRO NeoShell WxB Jacket Review
    • Montane Anti-Freeze Down Hooded Jacket Review
    • Fresh Wheels: Fezzari Veyo is an Aero All-rounder
    • Mountain Hardwear Summit Grid Hoody Review
    • Review: Patagonia Long-sleeve Capilene Cool Merino Shirt
    • 2022 Gear of the Year
    About Us
    About Us

    Since 1999, we have delivered in-depth gear reviews, articles and content. We feature a small staff of savvy, experienced writers who love to review outdoor gear.

    External links to Amazon, REI, Backcountry and other retailers include affiliate codes that give us a small commission on each sale.

    To contact us or learn more, go to our About Us page.

    © FeedTheHabit.com 1999 - 2023. All rights reserved.

    Type above and press Enter to search. Press Esc to cancel.